Dilip Tools & Instruments
Dilip Tools & Instruments
We are Manufacturer, Supplier, Exporter of Broaching Machine Model : DTI BRM and our setup is situated in Kolhapur, Maharashtra, India.

Method of Operation

  • The broach is mounted in a square section rack and secured at the top & bottom by clamps
  • Adjusting screws built into the machine body are set to obtain the correct depth of notch and its position along the specimen
  • Once set, the adjusting screws provide repeatability for the next specimen
  • The broach can easily be removed, for re-sharpening or replaced to cut a different type of notch
  • The sample is secured in the machine by two clamp screws
  • A light coating of cutting oil is to be applied to the broach and then the hand wheel is operated which draws the broach through the specimen to produce an accurate notch profile
  • After the notch has been cut, the sample is removed, the broach raised and the broach teeth cleaned, ready for the next sample

Technical Description :

  • The Pro Broach Hand Operated Notch Broaching Machine is designed for test houses and laboratories, which are producing small batches of test pieces in carbon steels, easily machined low alloy steels, non-ferrous and plastic materials
  • The machine is of robust construction designed to be mounted on our specially designed bench or on a customer's bench
  • Hand operation makes it ideal for small batch quantities

Standard Specimen

Ram Stroke 284 mm
"V" Notch preparation degree 45°
Jobs possible to do Izod Specimen Charpy Specimen
Specimen Size Izod - 10 x 10 x 75 Charpy - 10 x 10 x 55
Machine Dimension LxWx H 500mm x 254mm x 1360mm
Weight of Machine 65 kg
Standard Accessories V Broach 1 No.